In suiting and shirting units — Bhilwara is a well-known example — every quality is run from a master card (also called a design card): one sheet that tells the warping, drawing-in and weaving teams exactly how to make the fabric.
What is on a master card
- Programme / quality number — the reference everyone uses for the design
- Reed, pick and reed space — the construction (see reed count explained)
- Total ends and the warp pattern repeat — how many ends of each yarn, in what order
- Matchings — for each row letter (A, B, C…), the yarn count, blend and shade; extra matching columns are the colourways of the same design
- Weft pattern — the pick sequence, often "same as warp" for checks
- Draft and peg plan — the shaft drawing order and lifting plan for the dobby (see draft and peg plan explained)
- Denting and sometimes the weight per metre
How to read the matchings
Each pattern row is a letter. If the warp pattern reads A 24 · B 4 · A 24 · C 2, a matching table might say A = 2/40 PV Navy, B = 2/40 PV Grey, C = 2/40 PV White. A second matching column could swap in Black, Charcoal and White — the same design in another colourway.
Why master cards matter
- They are the single source of truth for repeat orders, often years later
- Costing needs every count and pattern share on the card — one misread digit changes the yarn order
- Cards are mostly handwritten and wear out; keeping a digital copy protects the design
Turning a card into a costed design
The Fibrous Labs app reads a photo of a master card with AI — reed, pick, matchings, draft and peg plan — and builds an editable design you check against the card. From there it calculates yarn per metre, GSM and cost, and prints a clean job card. Try the free textile calculator for the costing part.