Back to Blog
Design6 min read

Draft Plan and Peg Plan Explained for Dobby Weaving

A weave design shows what the cloth should look like. To weave it on a dobby, it has to become two instructions for the loom: the draft and the peg plan.

1. The design (point paper)

A grid where each column is a warp end and each row is a pick. A filled square means the end is lifted over that pick. One repeat describes the whole fabric.

2. The drafting plan

The draft shows which shaft each warp end is drawn through. Ends that interlace in exactly the same way can share a shaft, so:

Shafts needed = number of different end patterns in the repeat

  • Straight draft (1-2-3-4…): each end of the repeat on its own shaft — used for twills and satins
  • Pointed draft (1-2-3-4-3-2): mirrors the twill line — herringbone and diamonds
  • Grouped / skip draft: puts identical ends together to weave a large design on fewer shafts

3. The peg plan (lifting plan)

The peg plan tells the dobby which shafts to lift on each pick. It follows from the design and the draft: on each pick, lift every shaft whose ends are up in the design. With a straight draft, the peg plan looks the same as the design.

Example: 2/2 twill

  • Repeat: 4 ends × 4 picks
  • Draft: straight, 1-2-3-4 → 4 shafts
  • Peg plan: pick 1 lifts 1-2, pick 2 lifts 2-3, pick 3 lifts 3-4, pick 4 lifts 4-1

Practical checks before weaving

  • Shaft count fits your dobby (many dobbies take up to 16–24 shafts)
  • Long floats — a warp or weft passing over many threads snags and weakens the cloth
  • Lifting balance — very uneven lifts per pick strain the dobby

Draw a weave in the free Weave Studio and it shows the drafting plan and shaft count as you go. The Fibrous Labs app also builds the peg plan, flags long floats and can reduce the shaft count. Related: plain vs twill vs satin.

Draft PlanPeg PlanLifting PlanDobbyShafts

Related Articles

Try Our Free Tools

Practice with our free textile calculator and weave studio — no login needed.

📊 Calculator🎨 Weave Studio