Back to Blog
Fundamentals5 min read

Cover Factor in Woven Fabric: Formula and Worked Example

Cover factor measures how much of a fabric's area is covered by yarn. Two fabrics with similar cover factors feel and behave alike, even if their counts and setts differ — which makes it one of the most useful numbers when designing or changing a quality.

The formula (Ne system)

Warp cover factor K₁ = EPI ÷ √(warp Ne)

Weft cover factor K₂ = PPI ÷ √(weft Ne)

Cloth cover factor K = K₁ + K₂ − (K₁ × K₂ ÷ 28)

The last term removes the overlap where warp and weft cross. In this system a cover factor of about 28 means the threads touch completely — a fully covered cloth.

Worked example

88 EPI × 68 PPI with 40s cotton in warp and weft:

  • K₁ = 88 ÷ √40 = 13.91
  • K₂ = 68 ÷ √40 = 10.75
  • K = 13.91 + 10.75 − (13.91 × 10.75 ÷ 28) = 19.32

Keeping the same feel with a different count

Buyer wants the same fabric in 30s instead of 40s? Keep the warp cover factor and solve for EPI:

New EPI = K₁ × √(new Ne) = 13.91 × √30 ≈ 76 EPI

The heavier yarn needs fewer ends per inch to give the same cover. Do the same for the weft, then check the cost and GSM.

What cover factor tells you

  • Higher — firmer, less see-through, more wind- and wear-resistant, but heavier and harder to weave
  • Lower — lighter, softer and more open, but more prone to seam slippage
  • Twills and satins have fewer interlacings than plain weave, so they can be set denser for the same feel

The Fibrous Labs app shows the cover factor of every design next to its GSM. Work out EPI and PPI first with the reed and denting guide, and convert counts with the yarn count converter.

Cover FactorFabric ConstructionEPIPPIYarn Count

Related Articles

Try Our Free Tools

Practice with our free textile calculator and weave studio — no login needed.

📊 Calculator🎨 Weave Studio